TeapotsCool Curated Vessels & Tea Craft
Menu

Brewing Utility · Vessel-Aware

Interactive Tea Steeping Timer

Dial in extraction down to the second. Select your tea cultivar and teapot material below for tailored pre-warming guidance, fine 15-second adjustments, and an optional studio bell chime.

Koko the Kyusu tea pet keeping watch over steeping time

Steep & Pour Timer

Precision Tea Steeping Timer

1. Select Tea Leaf

2. Teapot Vessel Material

Glass radiates heat quickly — pre-warm with hot water and keep the lid fitted while steeping.

Japanese Sencha

02:00

80°C / 176°F

Ready to steep Japanese Sencha.

Thermal Reference Guide

Water Temperature & Vessel Pairing Chart

Baseline Western-style and gongfu parameters tested across glass, clay, porcelain, and enameled cast iron vessels.

Recommended water temperatures, steeping durations, and vessel pairings by tea type
Tea Cultivar Target Temp First Steep Re-steeps Ideal Teapot Material
Gyokuro (Shaded Green) 60°C / 140°F 90s (1m 30s) 3–4 infusions (+20s) Tokoname Kyusu or Porcelain Hohin (pre-warm gently)
Japanese Sencha 80°C / 176°F 120s (2m 00s) 3 infusions (short 30s 2nd steep) Side-Handle Kyusu or Wide Borosilicate Glass
Silver Needle White 85°C / 185°F 210s (3m 30s) 3–4 infusions (+30s) Clear Glass or Thin Porcelain (avoid unlined clay)
High-Mountain Oolong 90°C / 194°F 180s (3m 00s Western) / 45s Gongfu 5–7 infusions (+15s) Magnetic Gongfu Glass, Porcelain, or Yixing Zhuni
Assam & Breakfast Black 100°C / 212°F 240s (4m 00s) 2 infusions Double-Walled Stoneware or Enameled Cast Iron (pre-warmed)
Shou Pu-erh & Herbal 100°C / 212°F 300s (5m 00s) 6–10 infusions (after 10s rinse) Dense Yixing Zisha Clay or Cast Iron Tetsubin

Frequently Asked Questions

Why does teapot material change how long I should steep tea?

Vessel thermal mass and thermal conductivity control how fast water temperature drops after you pour from the kettle. Single-wall borosilicate glass radiates heat quickly, cooling water during a 2- to 3-minute infusion, whereas pre-warmed cast iron or thick double-walled pots hold extraction heat steadily near starting temperature.

Should I pre-warm unlined Tokoname clay or Yixing clay teapots?

Yes. Porous unglazed clay absorbs initial thermal energy rapidly when cold. Swirling boiling or target-temperature water inside your empty kyusu or Yixing pot for 10 seconds before adding dry leaves prevents a sudden 6°C to 10°C temperature drop during the crucial first steep.

Why do Japanese green teas taste bitter when steeped in boiling water?

High temperatures above 85°C (185°F) rapidly extract bitter catechins and excess caffeine before sweet L-theanine amino acids balance the cup. Steeping sencha near 80°C (176°F) and shaded gyokuro at 60°C (140°F) unlocks sweet umami broth without harsh astringency.

Can I adjust steeping time mid-countdown for multiple infusions?

Yes. Use the +15s and -15s step controls anytime during a steep, or reset between gongfu flash infusions. For rolled oolongs and aged pu-erh, add roughly 10 to 15 seconds on each subsequent pour after the second infusion.